Silversurfer7
New Member
- Messages
- 18
- Reaction score
- 0
- Points
- 0
I'm planing on installing a new, double lavatory, vanity in my master bathroom. Current bathroom has one lavatory and is located on the third floor of my condo Bldg. Wondering if I should attach to the existing wet vent with a double wye fitting or two individual san tees? With the cathedral ceiling, the top of the existing vent (on the roof) is approx. 15' above the center of the lavatory trap arm.
Curious on how I can properly support the upper, steel, portions of the vent -once the lower portion is cut out to accommodate the new, ABS, fittings? Any advice is appreciated.
Thanks a lot
Robert
in California
Curious on how I can properly support the upper, steel, portions of the vent -once the lower portion is cut out to accommodate the new, ABS, fittings? Any advice is appreciated.
Thanks a lot
Robert
in California
Last edited: