Any trick to inserting a tee in an existing 1/2" copper line? Matt
BobSmith New Member Messages 22 Reaction score 0 Points 0 Mar 24, 2006 #1 Any trick to inserting a tee in an existing 1/2" copper line? Matt
Terry The Plumbing Wizard Staff member Messages 29,942 Reaction score 3,461 Points 113 Location Bothell, Washington Website terrylove.com Mar 24, 2006 #2 No, just spread the pipes and insert the tee. If you can't do that, then you might use a "repair" coupling which allows the pipes to be slid sideways, and then connected by slipping the coupling back over the pipe.
No, just spread the pipes and insert the tee. If you can't do that, then you might use a "repair" coupling which allows the pipes to be slid sideways, and then connected by slipping the coupling back over the pipe.