1953 Crane bathtub and plumbing from that era.
The brass waste-tee exit port has no slip nut, this has me baffled
Yet it somehow mates with black iron and that odd slip nut. So there is some mystery fitting(s) between the drain tee and the nipple+90 elbow.
I had replaced the wastewater drain gasket, cracked and leaking due to age. After reassembly, the drain sits (more) crooked and the waste tee needs to come up. But I can't figure out the fitting/construction to do this. What is this?
With overflow removed:
The brass waste-tee exit port has no slip nut, this has me baffled
Yet it somehow mates with black iron and that odd slip nut. So there is some mystery fitting(s) between the drain tee and the nipple+90 elbow.
I had replaced the wastewater drain gasket, cracked and leaking due to age. After reassembly, the drain sits (more) crooked and the waste tee needs to come up. But I can't figure out the fitting/construction to do this. What is this?
With overflow removed: