david_talton
New Member
- Messages
- 7
- Reaction score
- 0
- Points
- 0
I have an antique ceramic sink vintage 1901. My intention is to have it reglazed, however I have been unable to remove the strainer - and so has my plumber. The problem is that the strainer is not exposed from the bottom of the sink - there is a 3 inch gap between where the spud connected to the bottom of the sink and the bottom of ths strainer. And the hole is too small to get a tool in. (On the bottom of the strainer there are 4 prongs that could be used to turn it.) We've discussed cutting it off, but we're afraid to cut the sink and we're also concerned that the strainer will not fit back through the overflow area. I'm having trouble attaching pictures, but will gladly send them if anyone wants to take a look. If anyone has any brilliant ideas, I'd greatly appreciate them. david_talton@hotmail.com
thanks,
Dave
(267) 408-3678
thanks,
Dave
(267) 408-3678