MikefromMi
New Member
Hello,
I'm having an extremely hard time finding anything on a replacement or rebuild kit for the compressor. Culligan Int'l #L4446-52 / Model # 415AA30-998D. When the compressor cycles I'm getting nothing. Inspecting the piston - it looks as if the cup once had a piece of paper or mica around it which is now torn in a section. The motor spins up fine and I cleaned all of the deposits off everything. But the water is just standing in the tube when it cycles. I blew through the check and duck bill. No problem. Also the duck bill is considerably harder to blow through than the check if anyone cares to comment that it's normal. Thanks for any help in advance, Mike
I'm having an extremely hard time finding anything on a replacement or rebuild kit for the compressor. Culligan Int'l #L4446-52 / Model # 415AA30-998D. When the compressor cycles I'm getting nothing. Inspecting the piston - it looks as if the cup once had a piece of paper or mica around it which is now torn in a section. The motor spins up fine and I cleaned all of the deposits off everything. But the water is just standing in the tube when it cycles. I blew through the check and duck bill. No problem. Also the duck bill is considerably harder to blow through than the check if anyone cares to comment that it's normal. Thanks for any help in advance, Mike