Hi I plan on installing pipe for my future sewage grinder pump and city water. My question is what type of pipe do I buy? I have general info that it should be 160+ psi 1 1/4" in size for the pump but not sure if it needs to be cts? or ips? or anything else. Also what type of water line? 1" NSF and what psi? I will be most likely purchasing at ******* or Home Depot.
I will be buring both about 10-12 feet below grade in northern MN. And will be capping for future use.
Thanks for your help.
Jason
I will be buring both about 10-12 feet below grade in northern MN. And will be capping for future use.
Thanks for your help.
Jason