Ernest P Worrell
New Member
- Messages
- 2
- Reaction score
- 0
- Points
- 0
The strangest thing happened. I went to clean the gunk out of the drain in the bathroom sink so I removed the trap and slid all the slush into a bucket. I went to put everything back together, and turned the water back on, but no water (hot or cold) came from the faucet.
It worked just fine only minutes before (although drained slowly). I unplugged the water line to the Delta faucet,and water sure comes out, so it's getting stopped in the faucet. But Why?!?
It's one of those faucets that you remove the handles with a 3/8" allen wrench, but I can't seem to do that -- I think the inside bit is stripped; it's just not turning.
What to do now? Thanks!!
It worked just fine only minutes before (although drained slowly). I unplugged the water line to the Delta faucet,and water sure comes out, so it's getting stopped in the faucet. But Why?!?
It's one of those faucets that you remove the handles with a 3/8" allen wrench, but I can't seem to do that -- I think the inside bit is stripped; it's just not turning.
What to do now? Thanks!!
