Ffltstn
New Member
Hello All,
I have two Logix 740 timers, one on the softener and one on the charcoal tank. I found then both without anything displayed on them. The GCFI outlet was tripped and I reset it and it stayed on. I have 12.8v at the transformer and at the plug that goes into the timers. These are outside with covers but exposed to weather in central Florida. Is there a way to test these? What may have caused them both to stop at once?
Thanks,
Ken
Update:
It must not be the timers. I found the old transformer I had and when I plug them in they come alive and go to ERROR. I assume because they are not hooked up. I will try changing the transformer and/or wires.
I have two Logix 740 timers, one on the softener and one on the charcoal tank. I found then both without anything displayed on them. The GCFI outlet was tripped and I reset it and it stayed on. I have 12.8v at the transformer and at the plug that goes into the timers. These are outside with covers but exposed to weather in central Florida. Is there a way to test these? What may have caused them both to stop at once?
Thanks,
Ken
Update:
It must not be the timers. I found the old transformer I had and when I plug them in they come alive and go to ERROR. I assume because they are not hooked up. I will try changing the transformer and/or wires.
Last edited: