Hi, running Fleck 7000sxt (close to 13yrs old now). Noticed Error code3 on the unit, so I pushed the Regen cycle. I didn't know what the unit was doing so I unplugged the unit and master reset the device (hold Regen button 5sec while plugging in the device).
I reentered all settings after master reset, and it started the regen cycle. I then tried to complete the cycle manually by pushing Regen button after each cycle when motor motor stopped.
Issue = Regen Icon is On/Solid, but drain is still draining water. Is this normal? It's been draining for the last 30min or so and I'm afraid it will continue to run at this stage.
Probably obvious that I'm notice at this water softer thing, appreciate any help you can provide. Thank you!
I reentered all settings after master reset, and it started the regen cycle. I then tried to complete the cycle manually by pushing Regen button after each cycle when motor motor stopped.
Issue = Regen Icon is On/Solid, but drain is still draining water. Is this normal? It's been draining for the last 30min or so and I'm afraid it will continue to run at this stage.
Probably obvious that I'm notice at this water softer thing, appreciate any help you can provide. Thank you!