3/4'' cpvc to multi head shower head faucet.

Users who are viewing this thread

Chas1057

New Member
Messages
9
Reaction score
0
Points
1
Location
New Jersey
I have 3/4" cpvc supply to the multi head shower faucet. Would it make sense to stay with 3/4"
after the faucet to the shower heads, or switch to 1/2" going to the heads. My concern is pressure
out of the heads
 

Jeff H Young

In the Trades
Messages
8,766
Reaction score
2,168
Points
113
Location
92346
Well plastic is cheap how much work / money you looking to save just go big or go home as they say once its buried youll never want tear wall out to go back to 1/2 inch. that said it might be over kill on 2 heads as thats Multiple right?
 

John Gayewski

In the Trades
Messages
4,324
Reaction score
1,319
Points
113
Location
Iowa
The difference in that short run of piping will be very small.

Why are you worried about pressure? Do you have low pressure?
 

Chas1057

New Member
Messages
9
Reaction score
0
Points
1
Location
New Jersey
The feed supply to the shower is 3/4 cpvc.
The shower faucet/diverter will supply a handheld head, 12" overhead rain, six body heads.
The inlets on the faucet/diverter and heads all have 1/2" connections.
Will I obtain better pressure continuing with 3/4" after the faucet/diverter, or obtain the
same pressure utilizing 1/2" to all heads.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks