uponor pex propex

Greetings. Can I use a pinch clamp on the Polybutylene side of a Pex to Polybuylene fitting? The fitting is cold expansion pex (Uponor). I have fittings, but only have pinch clamps convenient. Although the clamp manufacturers don't state polybutylene compatible in the information I could find...

Hello, We've been building a house and the rough plumbing was done about a year ago, but we're just now getting ready for insulation and drywall. Long story. The reason I'm writing this is that I happened across a story a few weeks back regarding a class action lawsuit for Uponor Red and Blue...

I'm looking to replumb the old house and really like the Manabloc but I also really like the Uponor connects. Now I know the two are directly incompatable but could you run your manabloc, branch out with your PEX B a length of your desire then transition with a connector to PEX A so that the...

Hi All, I purchased some unused Aqua PEX (Wirsbo Aqua Pex 1006, SCR 9, B37.1 Potable, 130 PSI.) that turns out to be about 12 years old. It was stored under a house (no sun contact) and appears to be in good condition. Would this be safe to use to plumb my new house? Thanks much! Billboe

For my project I've been using Uponor PEX pipe with ProPEX fittings and the Milwaukee expansion tool. Is it safe/acceptable for me to use non-ProPEX fittings with the Uponor PEX pipe? Many Thanks