trap adapter

  1. KiviP

    Trap Stub out from wal

    Hey guys, I have a silly question. I plumbed a double vanity and closed up the walls. My math was a bit off on one side due to crooked framing so one of the trap connections is a bit more recessed inside the wall (3/8 to 1/2 inch) Would this be too recessed to glue a spigot adapter into? Or...
  2. Shelbycobra427

    Best way to handle Lav drain for remodel

    I'm on the home stretch of a small powder room remodel and would love some feedback from the pros here on the proper way to handle my lav drain. I was originally planning on cutting out the brass elbow and a section of the copper drain and replacing it with PVC and a solvent welded trap adapter...
  3. Loneriver

    Attaching new PVC drainpipe to copper stub out

    I just removed an old bathroom vanity, sink, and plumbing back to the wall in a house built in 1964. The existing connection from the wall was a brass piece that threaded into the stubout. The existing drainpipe was chrome and was sweated in to the brass piece. I am not going to sweat any new...
Top