soft copper

Hello, I own and maintain several properties. over the years i have gotten more and more serious about best practices for long term maintenance. Though I typically use braided supply lines for fixtures, i am wondering if i should be considering using flex copper with ferrules and compression...

Hi, first off, I'd like to thank this forum for all the plumbing advice I've read as a guest. I haven't been able to find an answer to this particular question so I finally joined. I am making a heat exchanger for my shower trap arm. I have a 2" section of copper drain pipe that I want to coil...

Hi, I'm planning to install a Sanden Heat Pump Water Heater. These heat pumps do not have a tank, so I have to run about 20 ft of supply and return water line through a crawlspace from the outdoor unit to a laundry room where I'm planning to install a 120 gallon tank. The crawlspace is fairly...

As I understand it, code allows soft copper to be run inside a wall cavity for water lines. I am installing a long a 24' run of 3/4" hot and cold lines to a bathroom remodel. The lines need to travel from a crawl space, then inside a preexisting exterior wall and finally through a brick wall...