ice maker connection

  1. Tuttles Revenge

    Ice Maker Shutoff Location

    In our remodel projects for the last 15+ years, we have been locating a shutoff valve or box for the refrigerator someplace that doesn't require moving the refrigerator or getting under it to shut off the water. I started off installing copper refer tubing in the framing and leaving a coil at...
  2. Brady

    Ice Maker Box Soldering

    I am looking to install an ice maker box for my fridge. The last owners just ran a poly tube up through the floor and I would like to do it correctly. I was looking at the Oatey I2K boxes and was debating between the solder or the pex connections. I have soldered before and feel comfortable...
  3. Shelbycobra427

    1/4" Pex to 1/4" compression for Ice Maker

    I'm trying to connect a water/icemaker supply line to the refrigerator for a friend. Her house is new construction and the plumbers left a 1/4" PEX line (3/8 O.D.) sticking out of the floor behind the fridge. The fridge has a 1/4" (male) compression fitting, ready for a braided 1/4" icemaker...
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks