greensand

  1. J

    High iron (12ppm) and high Manganese (.44ppm)and slightly acidic water (6.5)

    I have a ph of 6.5, iron is at 12ppm, manganese is .44 ppm, hardness is 3 grains, and TDS is 90. I’m trying to figure out which media is the best in my scenario i know birm won’t work because of ph. All the solid magnanese oxides require a higher ph to perform at their full potential. Greensand...
  2. Maegan

    Some questions greensand and rescare

    Just had both (9 year old fleck 2510s rebuilt (piston, seals spacers). One greensand/potperm and the other resin/salt. Greensand was rebedded Float in potperm tank was replaced They did not replace or clean potperm felt After the service I called pro products to ask about ban-t because tech...
  3. Mike Water

    Water treatment issues - Iron removal using Greensand, Carbon and Ion Resin

    Would very much appreciate some feedback on some well water treatment issues. We have a whole home treatment system consisting of 1) small plastic sediment filter 2) large standing stainless filter containing both activated carbon (top) combined with Manganese Greensand (bottom) in one unit 3)...
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks