Search results

I had an existing wall hung toilet that went out. Bought a new Gerber and took down the old one put up the gerber. It leaks like there is no gasket installed. The gasket is 3/4 thick. Does the surface of the carrier look correct? Where should I start to fix this. Thanks

I have a drop in tub going to install then have tile man install tile. Have a Delta RP23601 faucet can it be roughed in before the tile or should it be after? The faucet is going in the deck not the tub. Instructions say for up to 1 1/4 so I have to make sure the finished deck is not...

I am suppose to be under the IRC plumbing code. This is an addition to an existing house I thought I would run a 3 inch main line use wyes to catch the toilet with 3 inch run a 2 inch vent for the toilet to the wall and up to the attic, then a 2 inch line off the 3 inch main for the shower...

It was built in 1969 and the Wall hung is American Standard. I want to replace one it looks to be original to the house it is gravity with a tank and a weak flush. How do you determine if a wall hung toilet will fit the carrier? What are the things to note and watch for? Thanks

Ranch style house. I have a 4 inch pipe running vertically from the roof to the basement It has no drains connected to it on the first floor or above. I need to connect a toilet, and a tub and shower to this 4 inch then connect it back to the exiting pipe in the basement. I am planning on...