Search results

Which one of the these rear discharge toilets am I best off purchasing - A/S Yorkville, A/S Yorkville Pressure Assisted, Gerber Maxwell or Gerber Ultraflush all at 1.6 gpf? (I've read the threads but am stuck given there is no direct comparison among these models.) Many thanks, Joe

Update 4/9/19- Absolutely stuck! I've tried so much to get more then a nominal flow from the rim jets and increase the water surface area of my ten year old Kohler pressure assisted rear discharge toilet. I cleaned the rim holes, removed the tank and back probed towards the rim, replaced the...

What are currently the best choices for waxless seals when reinstalling an existing American Standard rear discharge toilet? Similarly, what are the best choices for a new installation. (I've followed the threads here but the advice is several years old.) Many thanks, Joe

I live in a high rise and have been told by the building that because of a four degree hot water temperature differential between my bath and my bathroom sink the cartridge/diverter must be replaced. The building has had problems providing hot water to the bathrooms. Would a four degree hot...

Periodically, a seal fails on one of the rear discharge toilets in one of the many apartments above me in my line. This causes water to damage the sheet rock on the backside (the face towards the waste stack) which leads to damage on the face side necessitating replacement. In the past I've used...