Recent content by Nick M

It may be delta or peerless from my google image searching, but was hoping to confirm brand and model so I could replace the handles with something more fitting for the period of this 1890 house: Hoping to use porcelain handles without having to replace the full valve body. Going into the...

Progress update here: Last night I finished laying the tile over the insulation boards and shower. All has gone well so far. The idea of using a vibration sander to push out air bubbles under the foam boards was tried. I only saw one air bubble come out, so I either had very little air...

Brilliant advice, Jim. Thank you! Funny you mention the smaller format tile: Just a few minutes after I brought home the selected 2 inch hex tile I thought to check the minimum dimensions from Wedi, which were 4 inch x 4 inch for Wediboard. I then proceeded to get a great workout returning...

I talked to Schluter and they do not approve Kerdi board to be used under the tile. So I bought 1" WEDI board and plan to lay tile down on it this week. If I run into issues I'll post here. Otherwise, assume the product worked as intended!

I have a uninsulated slab in a 1910 carriage house for my bath remodel. I have plans to do a curbless entry to the shower. I was planning to use a foam pre-slope and have used the oatey shower pan liner method in the past with good success. Regardless of the system for the shower pan, I will...