Recent content by MAD MARK

Main supply line off a 1/2 HP well pump is 3/4" and quickly necks down to 1/2" after the installed (non-working) conditioner. In saying the 58XX models are newer is fine, but it seems that my limiting factor is the line size. Thanks for the information.

We have a water harness check at work that I used. I knew that iron would impact the size and settings. I was going to get an actual test done at local water place. Was just wondering if I am on the right trail. I am going off the details in the listing to say that the 2.0 ft3 and it states...

Hello all, Long time lurker decided to go ahead and buy a new softener after messing with the old one (Kenmore) that came with my house that is no longer functional (mother board/lcd). After some looking seems like the Fleck 5600 SXT is pretty standard and reliable. My situation. 5 people...

I have tried 3 different "odor filters" to no avail. I have tried just the kitchen sink and dishwasher on an AAV and still stunk out the vent stack. Is there a specific reason the kitchen has to have own?

Thanks for your response and thoughts. That 2" is ~10" high, and house was built in 1981. Not even sure if it was inspected. I was even contemplating running a sloped horizontal to back side of house, same roof, and putting the stack out there.

Here is an actual picture to show the 2" kitchen vent and the one I'd like to hook into. It better displays the wind blowing against the upper level swirling down past the sitting area patio.

I will be doing the plumbing and I am the roofer. Not really looking to change the 3 to a 4. The 2" will tee into the 3" 2 feet below roof line. The 2" will be capped off on roof. I don't mind spending the ~$100 for the pipe and connections to try it out, just seeing if anyone had better idea...

Hey guys. Have a question about tapping into an upper vent stack. Split level house. Pictures below show my fixture setup. The outside sitting area always gets a sewer smell when using anything on that stack line. Ive tried to trace down the issue with no resolve. The vent stack is located so...