Recent content by Dave17

Will have to get those for you, it is a two zone 2x 12000 BTU Midea system. The indoor units have 1/4 and 3/8 lines in them but the 3/8 line has a 1/2 fitting brazed on.

di d Did they give any logic for the oversized line? Seems that would effect the efficiency of the unit.

To make it a little clearer, the line at the indoor unit is 3/8 with a 1/2 inch connector installed, the connection at the outdoor unit is 3/8, the line supplied it 1/2 with adptor to connect to outdoor unit.

Bought a mini split system, live in the country and no one want to come out and install it. Unit came with line set bu it is not log enough. Manual says lines should be 1/4 and 3/8. BUT, the line set that came with it is 1/4 and 1/2. The outdoor unit is set up ith 1//4 and 3/8 connections. the...

Tank and well and pump are all in good shape. Used two Square D's then one Chinese and now back to Square D. Am going to modify spring assembly for more contact pressure when it closes. First presure swithc lasted 9 yeaers, then had new pump installe and Tech installed new pressure switch, it...

Have not measure current, 1.5 hp pump, no sand blowing in. Have watched it activate and it appears contacts are bouncing and arcing.

New pump and pressure switch three years ago, pressure switch was failing in July, no making good contact, replaced with a new one, lasted two weeks and experienced same failure, replaced again and after 1 week am experiencing the same failure ...contacts not mating properly, gonna put one more...