Recent content by CarterM

so I figured out the problem. It was not a BL05 error. The display does not work correctly and it looked like 05 but it was BL86, “Incoming power is inadequate (this can happen if a generator is not producing 60 Hz)”. After testing the output on the generator, it was running at 62.8 Hz. I...

Yes, it does have an outside temperature sensor attached.

I bought a 11kWH Wen Generator and my uncle who is an electrician wired up a connect from the outside of my house into the panel using an interlock switch. I tested the generator last night and it powers what I need it to. Some lights, refrigerator, well pump and almost the water heater. The...