keeena
New Member
I have 2 questions to entertain y'all with:
I have a well dedicated for irrigation. 300' deep in the northeast. It's currently a 1.5HP pump; don't have more specs than that. My question: how do I determine what size pump I need? I don't have a meter on my system; is one necessary to figure this one?
I also wanted to checking the price for a 3200 series pump, model 7SR15S4-2W2630. Its a 4" 7GPM, stainless 1.5HP pump 2-wire, 230v. I just want to make sure i'm not being excessively up-charged for the unit. I'm cool with a generous stocking % which I totally understand, just want to make sure what I was charged was in a reasonable ballpark. I found the motor (only, #2443099004) online for ~$700, but haven't found the entire assembly.
I have a well dedicated for irrigation. 300' deep in the northeast. It's currently a 1.5HP pump; don't have more specs than that. My question: how do I determine what size pump I need? I don't have a meter on my system; is one necessary to figure this one?
I also wanted to checking the price for a 3200 series pump, model 7SR15S4-2W2630. Its a 4" 7GPM, stainless 1.5HP pump 2-wire, 230v. I just want to make sure i'm not being excessively up-charged for the unit. I'm cool with a generous stocking % which I totally understand, just want to make sure what I was charged was in a reasonable ballpark. I found the motor (only, #2443099004) online for ~$700, but haven't found the entire assembly.