Toto Drake ADA/Elongated, horn is not round

Discussion in 'Toilet Forum discussions' started by mr23, Dec 26, 2007.

  1. mr23

    mr23 New Member

    Dec 26, 2007
    I just purchased my first Toto after reviewing information on this site. I expected the horn to be fairly round, but the one on this unit is narrower front to back. It looks as if the forward edge is pushed back. The open is 2" front to back, and 2.25" side to side.
    Pic is attached with dimensions drawn.

    Is this acceptable?

    I am planning to use a Fluidmaster wax-free, and am wondering if the shape will cause a problem for the rubber seal.

    Attached Files:

  2. Terry

    Terry Administrator Staff Member

    Aug 17, 2004
    Bothell, Washington
    Just push it on the horn of the bowl
    It should be fine.
  3. Sponsor

    Sponsor Paid Advertisement

Similar Threads: Toto Drake
Forum Title Date
Toilet Forum discussions Water level in bowl drops after flushing - Toto Drake CST744SG Sunday at 7:35 AM
Toilet Forum discussions Newbie question Toto Drake CST743S, cleaning rim holes Nov 21, 2015
Toilet Forum discussions Toto Drake II 1 gallon toilet vs Caroma Somerton Smart Nov 19, 2015
Toilet Forum discussions Recommendations for new toilet: Toto Drake or a dual flush? Nov 9, 2015
Toilet Forum discussions Toto Entrada vs Drake1 water spot and bowl wash Oct 19, 2015

Share This Page