Shower Kit

Discussion in 'Shower & Bathtub Forum & Blog' started by KLD, Jun 9, 2009.

  1. KLD

    KLD New Member

    Messages:
    1
    I am updating my shower faucet & spout. Wanted a color not used much anymore, so found a kit and bought it. It is for a shower/bath combination. I have just a standing shower, so I only have the faucet (single) and the shower head. (No tub spout, so no diverter to that.) Have not opened box yet. Can I use the faucet (single) from this kit on my different type shower?
  2. jadnashua

    jadnashua Retired Defense Industry Engineer xxx

    Messages:
    22,129
    Location:
    New England
    Normally, yes. If it is really old, or was designed for a tub only, it MIGHT not contain the mandated anti-scald features. This is not good (but it probably has this feature). I would not install it unless it did, though. Sometimes there are two outlets, but one is plugged. You might be able to plug the lower one and use the upper one alone. If they are both open, you'll need to find a plug for the bottom one if you are only going to use it for a shower.
Similar Threads: Shower
Forum Title Date
Shower & Bathtub Forum & Blog Failure of a large mud shower pan. Sunday at 3:50 PM
Shower & Bathtub Forum & Blog Shipping Shower Waterproofing in cold weather: How to protect from freezing Friday at 1:20 PM
Shower & Bathtub Forum & Blog Convert copper pipes from tub/shower to shower Wednesday at 1:25 PM
Shower & Bathtub Forum & Blog No p-trap for new shower, contractor says OK Oct 14, 2014
Shower & Bathtub Forum & Blog Help! Pre-sloped plywood shower pan? Oct 12, 2014

Share This Page