Jakehale
New Member
- Messages
- 12
- Reaction score
- 0
- Points
- 0
I just redid one zone in my system because of an addition to the house. 3 of my zones are working like they always have, good. the one I had to redo is action weird. Right now I only have two heads on that one zone. I turn on the system, the pump "pumps" up to what i call the max pressure and then cycles down, at the end the two heads are like spitting out water and then not, then spitting out then not, and so on, surging. What i did to the zone was remove about 3 heads (from 5 down to two) and instead of running 3/4" pvc all the around the house, i installed a adaptor (pvc to funny pipe) and ran the funny pipe to the two heads.
could that be my problem? going from 3/4 pcv down to 1/2 funny pipe and only having two heads?
thanks folks
Jake
could that be my problem? going from 3/4 pcv down to 1/2 funny pipe and only having two heads?
thanks folks
Jake