xd2005
Member
- Messages
- 36
- Reaction score
- 0
- Points
- 6
As I mentioned in another post, I am in the process of converting approximately half of a 14'x20' detached garage into living space. The garage is old (according to the county website, it was built at the same time as my house - 1924) and is built with 2x4 framing (rough cut, actual size). The garage has a concrete floor with no foundation wall. From what I can tell, there are no anchor bolts along the exterior.
My project will consists of sistering 2x6's next to the existing 2x4 studs and rafters. I will also need to replace existing wall headers and sole plates (sole plates have evidence of rot/insect damage). I know it won't necessarily be an easy task, but I'm confident doing all this is within the abilities of me and those helping me.
My main question arises around the lack of anchor bolts around the exterior. If I understand correctly, they are required at certain intervals and at each board-end. What are the solutions for dealing with this situation?
Thanks!
Brian
My project will consists of sistering 2x6's next to the existing 2x4 studs and rafters. I will also need to replace existing wall headers and sole plates (sole plates have evidence of rot/insect damage). I know it won't necessarily be an easy task, but I'm confident doing all this is within the abilities of me and those helping me.
My main question arises around the lack of anchor bolts around the exterior. If I understand correctly, they are required at certain intervals and at each board-end. What are the solutions for dealing with this situation?
Thanks!
Brian