DIYorBust
Active Member
So I need to install a wall hung toilet with in wall tank. The need is to create adequate clearance in front of the toilet.
The Duravit Starck compact units(ME or starck 3) are 19.125 inches long, and the smallest toto is 20.875 inches. We'd prefer the smaller unit, but poor bowl washing has been reported with the duravits. The bowl could be changed out in the future if the flushing were unacceptable, making it a limited risk. The 2 inches makes a significant difference in this space.
However the duravit is specified as 1.6gpf bowl. Toto has discontinued it's 1.6gpf toilets, so if I switch to a Toto later, I'd have a 1.6gpf carrier unit in the the wall.
Do you folks think that would work okay with the newer 1.28gpf bowls from Toto? Would the duravit work with a 1.28gpf carrier? Thanks for your advice!
The Duravit Starck compact units(ME or starck 3) are 19.125 inches long, and the smallest toto is 20.875 inches. We'd prefer the smaller unit, but poor bowl washing has been reported with the duravits. The bowl could be changed out in the future if the flushing were unacceptable, making it a limited risk. The 2 inches makes a significant difference in this space.
However the duravit is specified as 1.6gpf bowl. Toto has discontinued it's 1.6gpf toilets, so if I switch to a Toto later, I'd have a 1.6gpf carrier unit in the the wall.
Do you folks think that would work okay with the newer 1.28gpf bowls from Toto? Would the duravit work with a 1.28gpf carrier? Thanks for your advice!