Mark Alan
Member
I am in the process of remodeling a house that sits on a hill. From what the county told me, there is 50 psi down at the bottom of the hill. The county ran what looks to be a 1 inch line from below the hill to my driveway. The elevation change is about 125 ft from the bottom to my house. I was told that I would need to install a pump at the bottom of the hill to get water to the house. Can someone please advise on the type of pump and what all is needed? I can get 120 or 240 volts for the pump. The house has one full bath, a powder room, laundry room and a kitchen with an ice maker in the refrigerator. I also have to outdoor taps.
Thanks,
Mark
Thanks,
Mark