Nate R
Member
http://www.youtube.com/watch?v=PHljh7sqZqE
Please take a look at my video. Roughly done, and not sure why the vid is so blurry. But I think it's all visible.
-Left trap would be for a bathtub. Right for a lav. (Assume a 1 1/4" trap that then goes to a 1 1/2" pipe)
-Assume proper 1/4" / FT slope.
-1 1/2" PVC for all of it except the bottom 1/8/Wye Combo. That combo would join 2" that would be existing.
-Elbows need to go around a chimney. I have them as long sweeps. Can I go to normal Sanitary sweeps or not?
-Don't know what fitting I should use to join and continue the vents. (The part where there is no fitting) Straight Tee or do I use an upside down Santee? If so, why?
-Anything wrong?
-Add a cleanout anywhere? (I have the one cleanout at the left end.
Please take a look at my video. Roughly done, and not sure why the vid is so blurry. But I think it's all visible.
-Left trap would be for a bathtub. Right for a lav. (Assume a 1 1/4" trap that then goes to a 1 1/2" pipe)
-Assume proper 1/4" / FT slope.
-1 1/2" PVC for all of it except the bottom 1/8/Wye Combo. That combo would join 2" that would be existing.
-Elbows need to go around a chimney. I have them as long sweeps. Can I go to normal Sanitary sweeps or not?
-Don't know what fitting I should use to join and continue the vents. (The part where there is no fitting) Straight Tee or do I use an upside down Santee? If so, why?
-Anything wrong?
-Add a cleanout anywhere? (I have the one cleanout at the left end.