Delta 600 series shower/tub valve

Discussion in 'Plumbing Forum, Professional & DIY Advice' started by xyz1612, Nov 26, 2008.

  1. xyz1612

    xyz1612 New Member

    Nov 26, 2008
    I have a delta 600 series tub/shower valve with diverter built into valve. My trim was replated to 24k gold and dont want to change trim.the three copper tubes on the valve are leaking and would like to replace valve but cant find replacement with builtin diverter. any options where i can continue using existing trim
  2. Master Plumber Mark

    Master Plumber Mark Master Plumber

    Feb 6, 2005
    Sensitivity be caring and loving to a
    indianapolis indiana - land of the free, home of
    I might have some in stock...

    I believe I have about a dozen of that model
    still laying in mothballs

    it sounds like you have gutted the valve stem by trying to
    turn the cam..if the copper lines behind it are leaking......

    send me a pic of your exact faucet and I might have
    something new laying around somewhere.

    let me know if you are interested and I will rummage for one.
    Last edited: Nov 26, 2008
  3. Sponsor

    Sponsor Paid Advertisement

  4. hj

    hj Moderator & Master Plumber Staff Member

    Aug 31, 2004
    Cave Creek, Arizona

    Well, if you were within my driving radius, I would repair THAT faucet for you. I do it frequently, even for other plumbers who abuse the faucet. IF you are going to the trouble of replacing the faucet body, why don't you just bite the bullet and install a SAFE modern pressure balanced valve with polished brass trim?
  5. xyz1612

    xyz1612 New Member

    Nov 26, 2008

    Master plumber mark may have a replacement valve but since i submitted my post i removed the threaded piece that attaches to the valve with three copper tubes. I will try to repair using three new copper tubes and solder to valve.
  6. Gary Swart

    Gary Swart In the Trades

    Sep 1, 2004
    Yakima WA
    I recently had a similar problem with my old Delta. The diverter plunger or pin wore out and while there is a repair plunger available, I had an antique brass trim and the plunger only came in chrome. The old trim was really showing its age as well, so I just installed a new valve body and a 17T trim kit. Of course this was much nicer looking and it has the anti-scald adjustment as well. This might be a good time for you to do a replacement, too.
  7. jimbo

    jimbo Plumber

    Aug 31, 2004
    San Diego
    Well, there is a big difference between polished brass, and gold, so I understand why he wants to keep it!
Similar Threads: Delta series
Forum Title Date
Plumbing Forum, Professional & DIY Advice Delta 17 series low flow tub Jun 2, 2015
Plumbing Forum, Professional & DIY Advice WTB: need help finding a polished brass spout for t27... series delta roman tub Apr 27, 2015
Plumbing Forum, Professional & DIY Advice Pfister Universal Shower Trim - Delta 1400 series Mar 12, 2015
Plumbing Forum, Professional & DIY Advice Help Identify The Model/Series Of These Delta Faucets Nov 16, 2014
Plumbing Forum, Professional & DIY Advice "old" 1500 Series Delta Shower Faucet/Trim Replacement Mar 23, 2014

Share This Page