AlwaysFixingIt
New Member
Do you have any advice on the best way to convert a Zoeller M53 to N53?
My M53 has about 60k cycles on it over six years, so I feel it's time to proactively replace the cap/switch assembly with all seals soon.
Alternatively, I could convert it to an "N53", put a LevelGuard switch on it, and I'd have a reliable pump for a long time. What's the best way to convert an M53 to N53?
I could zip tie the level arm up. But, would that still risk worn out switch contacts? Should the switch be bypassed? The arm seal it still a potential failure, so would it be best to silicon that area closed?
My M53 has about 60k cycles on it over six years, so I feel it's time to proactively replace the cap/switch assembly with all seals soon.
Alternatively, I could convert it to an "N53", put a LevelGuard switch on it, and I'd have a reliable pump for a long time. What's the best way to convert an M53 to N53?
I could zip tie the level arm up. But, would that still risk worn out switch contacts? Should the switch be bypassed? The arm seal it still a potential failure, so would it be best to silicon that area closed?