DanFL
Member
Hi All,
I opened up this wall for a renovation and found this washer trap does not meet the minimum height above floor. This is on a second floor. Am I allowed to raise the trap by adding the 45 bends as shown in the photo (IPC)? Washer rough-in box also needs to be raised. In case it's relevant, the upper trap arm is for a bathroom sink on the other side of the wall.
Thanks,
Dan
I opened up this wall for a renovation and found this washer trap does not meet the minimum height above floor. This is on a second floor. Am I allowed to raise the trap by adding the 45 bends as shown in the photo (IPC)? Washer rough-in box also needs to be raised. In case it's relevant, the upper trap arm is for a bathroom sink on the other side of the wall.
Thanks,
Dan