CenterTree
Member
In the middle of a bathroom redo.
Working on the sink/lav.
Got the (in wall, up through ceiling) 1-1/4 vent installed.
The vent will tie in at the top of the trap adapter via a sanitary tee. (in the wall cavity)
The P-trap is 1-1/4 and I have no choice but to run 1-1/4" drain at least down through the floor.
There is a floor joist almost directly under the wall plate where the vertical drain section needs to enter the basement. I can barely get a 1-1/4" down there.
I am having trouble finding a 1-1/4" SanTee locally. Two professional plumbing stores told me there is no such piece.
One place told me to just use a regular TEE.
I found a Sanitary Tee online, but for $10.17. and can't get it for a few days out.
Question: Is it a major (or code issue) problem to use a regular tee at that connection?
Thanks!
I will most likely take the drain line up to 1-1/2 after I get into the basement. Unless you guys suggest to just keep it at 1-1/4 all the way to the main.
Working on the sink/lav.
Got the (in wall, up through ceiling) 1-1/4 vent installed.
The vent will tie in at the top of the trap adapter via a sanitary tee. (in the wall cavity)
The P-trap is 1-1/4 and I have no choice but to run 1-1/4" drain at least down through the floor.
There is a floor joist almost directly under the wall plate where the vertical drain section needs to enter the basement. I can barely get a 1-1/4" down there.
I am having trouble finding a 1-1/4" SanTee locally. Two professional plumbing stores told me there is no such piece.
One place told me to just use a regular TEE.
I found a Sanitary Tee online, but for $10.17. and can't get it for a few days out.
Question: Is it a major (or code issue) problem to use a regular tee at that connection?
Thanks!
I will most likely take the drain line up to 1-1/2 after I get into the basement. Unless you guys suggest to just keep it at 1-1/4 all the way to the main.
Last edited by a moderator: