More accurately, it will not start at 3:00 AM.
Program A is my only program. I have set the controller to water every 3 days, all 9 stations, and have specified durations for each station. I know the program works because I can manually run it. I have tested the cyclic programming - starting at a more reasonable time - 5:30 PM - when I am awake and can watch it start - which it does. I then re-set the start time to 3:00 AM and 0 days remaining so it would run the next morning. Nada. Rain sensor installed but set to bypass. Date and time setting are correct.
I'm getting really tired (literally) of getting up early to check the irrigation system and I'm at a loss as to what could be going on.
I have called my dealer, but he's not especially quick at responding so I'm going to see if this forum is quicker.
Ready, GO! ;-)
and thanks in advance for your help!
Pat
Program A is my only program. I have set the controller to water every 3 days, all 9 stations, and have specified durations for each station. I know the program works because I can manually run it. I have tested the cyclic programming - starting at a more reasonable time - 5:30 PM - when I am awake and can watch it start - which it does. I then re-set the start time to 3:00 AM and 0 days remaining so it would run the next morning. Nada. Rain sensor installed but set to bypass. Date and time setting are correct.
I'm getting really tired (literally) of getting up early to check the irrigation system and I'm at a loss as to what could be going on.
I have called my dealer, but he's not especially quick at responding so I'm going to see if this forum is quicker.
Ready, GO! ;-)
and thanks in advance for your help!
Pat