I am remodeling my lake house bathroom. The floor is a concrete slab on grade. Re-doing the drain line is not an option. The bathroom originally had 3/16" paneling. I replaced with 1/2" sheetrock. Now my toilet will not fit on the flange. I have included three photos of my problem. From the sheetrock wall to the center of the toilet flange is 10 1/2". I realized I was going to have a problem when I temporarily installed the toilet after I demo'ed the bathroom. The toilet tank was against the stud with no wall covering. My old toilet measures 12" to the center of the toilet waste exit.
My question, should I just replace the toilet with a 10" design or try to find some type of offset?
If I replace the toilet, my wife likes the ADA taller toilet. Can you or someone recommend an economical replacement? Hopefully one that is available at one of the big box stores.
My question, should I just replace the toilet with a 10" design or try to find some type of offset?
If I replace the toilet, my wife likes the ADA taller toilet. Can you or someone recommend an economical replacement? Hopefully one that is available at one of the big box stores.