Clack, Can someone ID this water softener please

[alberto olmo]

i found this picture on google, which is exactly like mines but cannot find anything else about it. i believe i have a burnt board on mines

 

[Reach4]

Looks like WS1-CI http://clackvalves.net/p/ws1-1/ws1ci/

You can call a local Clack repairman, or you can replace the controller with a different brand. Or maybe you can find something in the used market.

https://terrylove.com/forums/index.php?threads/wsi-ci-clack-valve.48739/

 

[Sponsor]

 

[alberto olmo]

Looks like WS1-CI http://clackvalves.net/p/ws1-1/ws1ci/

You can call a local Clack repairman, or you can replace the controller with a different brand. Or maybe you can find something in the used market.

https://terrylove.com/forums/index.php?threads/wsi-ci-clack-valve.48739/

thanks for the response. i was wondering why i could not find any information on this, reading that thread definitely gave me some insight into that.

Do you know if any controller will fit on my tank? can i just buy a fleck and it should fit?

 

[Reach4]

Probably, but not sure. The great majority of softeners for the home use a 2.5" x 8 tpi (thread per inch) industry standard. There is the rare exception that exists.

Inside, the distributor tube can vary. Most is 1.050 OD (same OD as 3/4 inch schedule 40 PVC pipe). Not all.

You may find something in the used market.