Search results

I was quite pleased with my progress today until I got to the end of the line. No Joy, the trap arm for the laundry tray is 30" off the ground. I can't imagine any tray is ever gonna fit there. Tried rotating the wye, but then could not figure out the vent. Would sure appreciate some...

Yes, thanks, I can visualize that and will go re-draw. For the bath main that only need be 3" - *could it be 4"? I've already got the stick of 4 and only need about 1/2 of it for the vertical, and will need most of the 3 for the laundry drain.

Had an epiphany overnight. Now the laundry sink, the washer stand, and the tub all have trap arms into a vertical san-tee that has up-vent and down-waste to horizontal wye8th. Can I (should I) put an upside down 2" san-tee on top of the 4" stack to add venting to the stack, with the laundry...

First thought: LimeAway or CLR under the rim with a copper scouring pad, a mirror and a dental pick. Tenants forget they have to clean the toilet once in a while, and get under the rim too, to clean the ports like HJ said. Especially here- we have such hard water it is a common problem. The...

HA! used a web link. g'nite all.

307x395 pixels, 40kb. Still get error.

no good, sorry. popup says "the following error occurred: There was a problem." LOL but not so much. It's 117kb .jpg - is there a size limit?

Bath & Laundry Remodel #3, and my first on two floors. Both prior jobs a resounding success thanks to advice and guidance found here. I should get pix of the tile job up - - but I digress. #3. The bathroom is gutted, open, and ready for rebuild. Please see attached pic for reference. I...

Farrukh, I no longer own a BAXI machine so no I will not contact you privately. Year 1, great. Years 2-8, a $500 repair EVERY winter, going w/o both heat and hot water while waiting for parts from Canada. Year 8 I found a path to a sales manager at BAXI to make a Lemon-Law warranty claim, who...

That is sad to hear. These have been my favorite fillers for years and problem-free. Actually it is the Delta brand, I've only heard the two names used interchangeably. The packaging does say anti-siphon, but maybe that is different than siphon breaker. Anyhow, thanks for the advice much as...

Good Morning Oh Venerable Dispensers of Plumbing Advice. a search on the forums yielded no match to <FV75> or <fill valve diaphragm>. My FV75 fill valve is not operating the way I think it should. I have installed many of these, they are the flat ones with a diaphragm. This one was purchased...

All fixed THANK YOU Response from win-air was to call marathon intl which had already proved a dead end for me. Replaced expansion tank, thanks. So then I called every plumber within 50 miles, not a one of them had even heard of Baxi (?!) but I did find one who was willing to give it a go...

The company I bought my -- BAXI LUNA 301fi -- from in 2004, whom I believed was a reliable dealer, no longer sells or services this brand :( , and neither myself or (allegedly) my plumber (and installer of it) has been able to find tech support despite MUCH effort over the last six months. Not...

I have a new crazy idea. Glass shower doors seal watertight, right? So if that method were used on a small door, say, like a cabinet door, that would be watertight also, right? Where I'm going with this is to build a cabinet/shelf that opens into the left (back) wall of an alcove tub...

wow. thanks, all! I don't have a 6' level, but I do have a straight 8' 2x4 I put on end, and put the 4' level on that. Doing it that way it is only about 1/2" down from door to wall. The first 3' from door is about level, the 2nd 3' is about 1/2" off, and the 3rd 3' is another 1/2 off. So...

It all started when a tile popped off from the wetwall of the tub enclosure - - - I hope this is the right forum in which to start this thread. Some background on me: love to tear things apart. putting them back together is a close second. not afraid to tear one more thing out, may as well...

I'll chime in from the landlord side: I would ALWAYS prefer the tenant call me first. It takes awhile for my new ones to come 'round, to understand that I will not get mad at them. A lot of tenants are scared of their landlords - I've met a few LL that are pretty scary myself! Anyhow, the way...

We need (IMO) to get this back on track - like *that will ever happen :D Please share your experience with washlet seats. Mike50 is the only one who put forth an opinion, and that was someone else's opinion AND he was answering his own question. I'd still like to know more: Do any of the...

We need (IMO) to get this back on track - like *that will ever happen :D Please share your experience with washlet seats. Do you use it every time? Just sometimes? Does it eliminate the need for TP? Does it make a splashy mess around the toilet? How is it to clean? Do the controls work...

hj, we've got two projects going in this thread - Carol (that's me) wants to convert from standard floor discharge to wall mount but am not committed yet, and Jeorg has a committed project to convert from wall hung to floor-mount rear-discharge with a fine Yorkville on the way. Jeorg, if 4"...