Search results

3 years ago this forum gave me instructions,but, I have lost my notes. I remember: Tank clean, dry, and empty. Clean bowl holes. Raise Flapper, and pour in 1 gallon murriatic acid. Questions: Have I made any mistakes, or omitted things...

A few years ago, using the forum advise I corrected the problem easily. Cleaned bowl holes, raised flapper, poured in 1 gallon of murric acid.

Flushing action in our 2 toilets is beginning to slow, sometimes requiring a 2nd flush. I have checked the rim holes, and they are open. Last May when I had a no-flush situation, I used a responder's suggestion regarding muriatic acid, and it was very successful. I think another rim...

Per dcplumber's suggestion, I duct taped the flange vent holes, poured in a gallon of muriatic acid ( pint in flapper hole, rest in bowl ), waited 7 hours, installed new red flapper with minimal chain slack, turned on water, tank emptied in count of nine, water filled bowl with swirling...

Tank water released just fills bowl with a swirling motion ,but does not generate the swishing suction action needed to flush. I have tried the following actions: used k-67 bacterial drain and trap cleaner in bowl overnght, tried a 2gal.pail flush and recovered 2 small globs(1"dia) of...