Recent content by SEEKING_HELP

  1. SEEKING_HELP

    CLOSED CELL INSULATION BLOWN OVER PRO PRESS COPPER PIPE FITTINGS

    Have heating pipes running the length of the basement, below ground, a couple inches from the wall and looking to insulate all the walls with closed cell foam. Fittings are all pro press and want to know if the expansion force of the foam around the fittings from the closed cell can cause the...
  2. SEEKING_HELP

    How to connect BURNHAM 206-EN to Fan in Can?

    Boiler has it's own pump. Wiring diagram attached. Burnham model 206-E and Field Controls Fan In Can CAS-4. 2 electricians not sure how to wire properly.
  3. SEEKING_HELP

    How to connect BURNHAM 206-EN to Fan in Can?

    Electrician stumped on how to wire the burnham 206-en (new, but old school boiler not modcon) to field control fan in the can for make-up air which is needed. Boiler does not have 24V separate take off and therefore looks like only way is to splice into the gas valve which could damage the...
  4. SEEKING_HELP

    EV CHARGER

    Running new line of 6/3 cable from main to garage to charge electric vehicle. OK to put the 6/3 cable through 1" pvc pipe over ceiling in finished basement? Concerned about heat from 6/3 cable running 40amps. Will use 50A GFCI.
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks