Recent content by reb101

Job is done. The copper pipe was quickly and easily cut off flush with the concrete using an angle grinder. I coated the inside of the pipe and a rubber drain plug with silicon calking then pressed the plug into the pipe about 1" deep. Filled the pipe above the plug with 3/4" of silicon...

Thanks for the feedback. I placed my ear on the capped pipe while my daughter tapped on the drains, water, and gas pipes in the basement. Just as you both suggested, the pipe was verified to be a drain. I'm going to cut it off tonight with a 4 1/2" angle grinder with a cut-of blade, then...

Pulled out the old dishwasher to install a new one. This 1 1/2" copper pipe (see photo) is sticking up from the concrete slab floor, blocking the installation of the new dishwasher. It appears to be capped with a soldered brass end cap. There is a keystone image stamped or cast into the cap...