I'm in the planing and demo stages of adding a bathroom to my basement and relocating my laundry. A few extra eyes on my plumbing layout would be great.
I'll be tying into the 3" cast iron pipe downstream of where the waste stack (1.5" VTR and kitchen drain) connects. Adding a bathroom...
Thanks again Terry for your feedback so far, it has been a big help.
I think I've finally come up with a solution that solves the floor drain issue and groups the bath group properly.
In this layout by rolling that first 3x3x3 wye 45 degrees it elevates the kitchen and laundry branch enough...
Thanks again cacher_chick for your feedback so far, it has been a big help.
I think I've finally come up with a solution that solves the floor drain issue and groups the bath group properly.
In this layout by rolling that first 3x3x3 wye 45 degrees it elevates the kitchen and laundry branch...
Yes, the location of the laundry floor drain is a problem without a great solution. It's further away from the appliances than I would ideally like. This was an issue with the original location of the appliances as well as the new. The floor pitches pretty aggressively towards the drain's...
While that most recent design works for wet venting the toilet through the lav sink, the floor drain is too far downstream to be wet vented. That's why I thought I needed the 3" pipe between the lav sink & floor drain in the earlier plan where I kept the toilet downstream of the floor drain...
Thanks for your feedback cacher_chick.
Am I correct in thinking your suggestion translates to something like this?
I think this plan still has issues because of a lack of a floor drain vent. Am I correct in this assessment?
The existing 1.5 inch stack would need to upgraded to at...
I'm planning a rough in for a bathroom that will include the relocation of the laundry.
Any advice on which is the better plan and what may still be incorrect would be greatly appreciated.
Plan 1: I think this one is not code because of lack of vent for the floor drain. Am I correct in...
Thanks for your feedback Terry.
Is the shower a problem because I am attempting to wet vent it around a wye? I am within an acceptable trap to vent length for 2".
As I understand it adding a vent to this would be a pretty easy fix. Install a wye rolled up at 45 degrees in the shower drain and...
I've been lurking here for some time now and (hopefully) have learned quite a bit. It's time to put it to a test!
I'm adding a basement bathroom and reconfiguring my laundry plumbing. I'd like some feedback on my layout plan. Hopefully this picture details my current layout well.
This...