Neil Binda's latest activity
-
Neil Binda replied to the thread Gnutti Sebastiano & Figli, HELP With GS CONTACT INFO Gruopo?.Old Huber valve -
Hi everyone . I am looking to see if anyone recognizes this faucet . From what I see this might be old American standard or Jado. I...
-
-
More recent codes have lower GPM's on faucets. It's the aerator restricting the flow. You can remove that and check flow there, and you...
-
I know an awful lot about plumbing, but not as much as MarlinMan when it comes to faucet parts. He's the best I've seen at it. :)
-
Neil Binda reacted to Marlinman's post in the thread Can anyone identify this valve stem? with
Like.
The stem is Harden Brass. The lower section of the cartridge is still in the valve. -
Neil Binda replied to the thread Can anyone identify this valve stem?.
-
Neil Binda replied to the thread Can anyone identify this valve stem?.Take a picture of the unit
-
Neil Binda replied to the thread Unknown pressure balance trim.Very helpful . Thank you Marlinman
-
Have you removed the cartridge? This one is quite common with many manufacturers.
-
Hi everyone . Hope all is well. I just wanted to know if someone recognizes this trim and who the make is Any help would be...
-
-
Neil Binda replied to the thread Aquabrass, Mystery Shower Cartridge.Aquabrass
-
Neil Binda replied to the thread Need to locate valve stems for these faucets.You can try some cartridges that might work but you have to re- use the old plastic part onto the new cartridges . Neil
-
Neil Binda reacted to Amore's post in the thread Need to locate valve stems for these faucets with Like.
I would prefer to just replace the least possible, just to stop the leaking.
-
Neil Binda replied to the thread Need to locate valve stems for these faucets.If you could remove that cartidge and the white plastic piece and than take a picture it would help . For the replacement hoses there...
-
Neil Binda replied to the thread Need to locate valve stems for these faucets.I say old Rubinet
