I'm installing the subject rough in box and I'd like to out the handheld to the left of the controls. This is port A on the box but the matrix pictures only show port C as the handheld on the other side of the box. Anyone with experience in how these work and if I can use A the same as C for the...
Well, it looks to me like it's 3" out of the crawl space into the yard. So you're telling me I have to replace the pipe all the way to the city tie in with 4"? Man, is there any way around this?
I'm in Raleigh NC. A previous post about a bathroom I'm adding to my attic and how I plumbed it is here: https://terrylove.com/forums/index.php?threads/does-it-pass.90352/
I've got it run all the way down to where I would tie it into the main stack and had a plumber I like who does a lot of...
Ok, last one Wayne. I promise. I really appreciate the help. If I can squeeze the drain onto the other side of that triple truss, does the attached image accurately reflect your thinking? Are the distances to the vent an issue? I added approximate run lengths to the drawing in purple. The red...
Thanks Wayne. Certianly not load bearing. I think the drawing is slight off where it shows the truss and vanity. I could probably drill in 45, but also don't have much issue running it down to tie in with laundry. Feels easier actually.
Glad that the shower vent can handle the toilet. I...
Ok, here is what I think I can do with your feedback wwhitney and Reach4. Thanks.
I wasn't able to get the lav drain over and past the triple truss, door framing was in the way. So I have to plumb that separate from shower and toilet. I have that coming down and tieing into the laundry drain...
Thank you very much for your time and suggestions. I can't connect them with one of those multi-port fittings, unfortunately. I have to run the 3" waste pipe through a triple beam and the engineer only approved 1 hole to support the 3" pipe. And the wall right behind the toilet and shower is...