Welcome to Terry Love Plumbing & Remodel DIY & Professional Forum. More ยป
Separate names with a comma.
Yes I set Pre charge to 38 PSI, Is the added pressure that much harder on the supply lines?
Hi, I turned up my well pressure switch a few years ago from 30/50 to 40/60 but my switch standoff pipe and switch were clogged and I did not...
I am not sure if I would draw the pressure down lower then the pump can supply, What pressure does it trip it at?
What are the difference between these Square D Switches, One is a 40/60 the other 2 are 30/50 I think one of them has adjustable pressure spreads...
I think i would keep it water, If I was ever to shut off heat totally off Id drain it down. I was thinking of putting race deck down.
I have a Drain to use, I have a few different to choose from How hot do you usually want the water for a system like this? Mini Split Would have...
When I poured the slab I did put 2.5 EPS around the outside of the walls, The only wall that does not have it is the front wall which is 2 ft high...
I am in the Catskills Mountains of NY, I have Insulation and a vapor barrier under the slab, I have 4 foot cement walls which are probably 3/4...
I'll run the Calcs as soon as I get a second. The Room upstairs has a door to the out side and 4 windows, the down stairs has a man door, garage...
Hi, My garage is 28x28x10 first floor and second floor is 28x28x8. Right now I have on the first floor a Big Max 80 K hanging unit ( I know it is...
I flush mine every year for the last 10 Years, I used white vinegar the first 8 years and haymaker the last two years. I flushed mine last sunday...
Thank you guys for the replies, Reach you are saying I could put the motor leads on the outside terminals and the power leads on the inside and it...
Okay so mine is right? I could switch the two power wires ( White and black from breaker box ) with each other and also switch the two motor wires...
