James Henry's latest activity
-
James Henry replied to the thread Will this tub drain/vent work?.Go for it. -
James Henry replied to the thread Protecting street water shutoff in yard near driveway.Install a bollard.
-
James Henry replied to the thread How do I insert an irrigation inline valve below the valve that is controlling the hose ?.Not you again. Unthread the 1/2 quick connect hose adapter from the ball valve, thread a 1/2nipple into the ball valve, thread a 1x...
-
James Henry replied to the thread Can this be considered a wet vent or do the fixtures need vented individually?.That drain looks deep enough to accomplish that. It can tie in less than 45 degrees vertically.
-
James Henry replied to the thread Can this be considered a wet vent or do the fixtures need vented individually?.The whole group must be on the same elevation. Look at my drawing again.
-
James Henry replied to the thread Cold and Hot Water reversed for entire unit.That's not your problem. Call them back.
-
James Henry replied to the thread Hello ..I probably would. Buy a carbide tipped hole saw for stainless. Practice on a scrap piece of stainless sheet metal. If you work at a big...
-
James Henry replied to the thread Can this be considered a wet vent or do the fixtures need vented individually?.For your consideration.
-
-
James Henry replied to the thread Can this be considered a wet vent or do the fixtures need vented individually?.No, but this can.
-
-
James Henry replied to the thread First time doing below slab drain plumbing, many questions.non-changeable situation. Proper support and backfill is vital. Proper grade is also extremely important. Do not take this lightly.
-
James Henry replied to the thread Back to Back Sink Plumbing/Venting Help.Find a happy medium for the height of both drain outlets. If they are both lavatories they should be the same heights...
-
James Henry replied to the thread Back to Back Sink Plumbing/Venting Help.The lav drains should have been installed with a double sweep. The lower drain is breaking the vent.
-
James Henry replied to the thread Basement bathroom rough-in new construction - what to check?.Also, I don't trust anyone anymore that say their a plumber. A lot of areas don't even require a license, you should ask them if they...
-
James Henry replied to the thread Basement bathroom rough-in new construction - what to check?.Draw a sketch of what you're doing and then you will get the correct answers.
-
James Henry replied to the thread Backflow preventer relief valve won't seal after rebuild.By the way you have to be certified to work on it anyway. Just call a plumber that is certified to fix and test it.
