Recent content by Hydrocynus

Hello, I am failing to get my ozone injector to work and I am not sure why. I want to inject ozone to my 1" input line to my main well filter as water is being drawn in. For this, I have ordered a 3/4" ozone injector which is vertically mounted with the flow going up against gravity. My bridge...

It is also sold on Amazon for cheaper and reviews on Amazon state both are equivalent and the feeders can be used interchangeably. I will test for 6 months and see. It is also a substantial saving (so, I am a bit skeptical).

Hello all, I am using Res-up with their dispenser in my softener to keep my resin in tip top shape. I also soak my resin every 6 months in Ban-T (give it a 24h soak). Are Res-up and Rescare the same? By looking at the SDS, they seem to be beside the color... if so, can I use Rescare in my...

I have found the manual for this board V3408EEE-04 (V3435EEE manual). What is the equivalent for this board of P74 program? P74: Downflow:1st backwash 12min :rinse 60min : 2nd backwash N/A : Fast rinse 10min. Also, how do I know if I have a 1" vs 1.25" valve? Thanks! Getting there....

Hello Dittohead and others, I was able to source out the right Clack 4 buttons board. See picture attached. I am using this ozone maker JED 103. I am going to do some research on the board and see if I can figure this out but I welcome any help I can get. Thanks you all for your help! Cheers.

Hello all, I wanted to give you an update. The CSV valve has been working very well since I installed it. No more short cycling. I took the extra warranty, so I hope it will outlast the warranty. As a follow up, my well pump is now 6 years old and I know that I am probably rearing its end of...

Thank you.

I showed the picture I have attached to the person willing to install it and he told me that there is some soldering to do . Any info on what the test port does? Where do I find more info about this board? Thanks.

Interesting because I have a guy here who told me and showed me a picture that he needs the five buttons clack valve to make it work with his ozone maker made for SPAs. What about pressurizing a tank with ozone with an air shut off and connect that to the one way valve intake? On another level...

See pictures

I will take a picture tomorrow. But if it does not work, can one just hook up an Arduino circuit to the control board and generate ozone when the air is being regenerated? Or simpler, use a vacuum switch to trigger the pump? After thinking more about it, an additional ozone contact tank where...

Hello, Can someone here tell me how to trigger an ozone maker so that I get an ozone drawn filter in lieu of an air drawn filter? Is there a switch I need to buy to make this happen? Thanks.

Thanks. Looks like the H2O2 would have to be placed before the well water enters the filter media. Costs of H2O2 a month seems to be about $25-$30 a month (about 2 gallons of 7% H2O2). So, it looks like this is going to be moderately expensive. I will test my H2S this week but it seems to me...

Well, I do not want to mess with the system that is already in place. I did think about an ozone drawn retrofit system as 100% O3 is a much better oxidant than 21% O2 (air drawn). However, that means that I need to lower the grade of my clack valve. H2O2 also does not come out cheap, hence the...

Thank you all for your answers. That does not really answer my original question as it seems that your answers elude to eventually changing the filtration medium. I have tested my own water using bench equipment in my lab. For the suflides and the iron, I used HACH test kits and used either a...