Recent content by Gagecalman

I was trying to understand how the adapter functions. It must make one of the 4 wires a common and change the function of one of the others. The schematic doesn't look like it matches the wiring.

Might be best to run a new 18/6 wire. What type of heat is this?

You are welcome. Post a pic of your finished installation.

Yes. I posted the part numbers above and corrected my posts.

So this is from the Moen parts lists: U362 uses diverter cartridge 200759. 3 or 6 Function Cartridge (Includes Shared Function) U232 uses diverter cartridge 200758. 2 or 3 Function Cartridge (No Shared Function) Everything else looks the same. Call Moen.

Turtles revenge is on to something. I looked up the parts. I'm not a plumber so take this for what it's worth. I'd call Moen and see if you can just replace the diverter cartridge . From the pics the housings looks the same. It looks like the U232CIS uses a 200758 and the U362XS uses a 200759...

Back up sump pump. If you have public water a water powered back up like the Basepump works great.

Is there an option to install an electric tank WH on that end of the house?

You can use that for 1-1/2" and 2" pvc pipe so that is the socket for 2". It's fine.

You need one for 7/8" OD. Only one on Amazon is Hilmor 1838955. The one Reach posted is the better deal.

Thanks for the link. That's a lot of info.

Forgot to mention that they're still made in the USA.

I'm in MD as well and there's no rain coming for a few days. Just heat. I'm not a plumber. I would replace the check valve unless it doesn't look too old. I've had excellent results using a HydroCheck HC6000 "Hi-Lo Sump Pump Controller" with a manual pump. No floats to hang up and no...

It's a shame he installed that with 3800W elements. I just installed a Rheem with 5500W elements that I got at HD.

5500W/240V=22.9 amps.