Recent content by Copperdesigno

I took the "just force it" approach. I used a bigger wrench on the brass part with the flat sides and got it to budge, and then after a full turn it started to move freely using just my fingers. Just as an FYI for anyone with the same issue.

I have a diverter that is leaking when its in the "shower" position. I took the diverter apart and I got to the stem, however, the stem is nothing I have seen before, I don't see any hex to get the stem wrench on. There is two flat surfaces on the brass, i tried to take pliers to it, but it...