Recent content by Byron Willis

Thank you, Bannerman! Great insight. Here's an update on my issue: 1.) Alignment. I had some lateral pressure from the plumbing fittings that may have been putting some extra stress on what I consider to be a fairly light duty connection. I have modified the plumbing lines and the tank...

Hello there! I just did some maintenance on my water softener (General Ionics EE0824, 8" X 44" tank, .75 cu ft resin). I cleaned, lubed, and reassembled the brine valve assembly, I replaced the resin, I cleaned the tank and the distributor, and I cleaned and lubed the bypass valve fittings...