Breplum's latest activity

Next time, go with condensing 96% effeciency Navien NPE A2

Simply run vent to near grade and put inside/cover with an appropriate Christy box with finger holes for air...metal, drive-over capable.

With normal installation, modern Navien units are amongst the best. They are often the only brand many plumbers/contractors choose...

Always choose duplex pumping system, as pumps always fail and the two pump systems give you best lifetime results of a difficult situation.

How big is the room they are located in? I find it unlikely that there is enough makeup air for both. Ideally they should be getting air...

Grohe, American Standard, Kohler, Hansgrohe, Pfister, Moen. NEVER buy off-brands. as far as "any tips on doing this type of work" Hire...

The gas supply lines should be full 3/4" not choked down as you have, and read the rating on the flex to match btu. Does not look like...

Ask the plumbing company to have the local rep of navian to meet with your plumber at the house. They are plumbers that haven't been...

Yes, distance is a primary flow inhibitor, so the more 1" you have the lower resistance and better flow...of course over short distance...

Electrical engineer guy chiming in here. My motto is that anything of high value ALWAYS gets a surge protector. I prefer the little...

There can be issues with resetting on those old carriers, depending on the depth of the recess on the back of the new toilet. Nice...

that photo close up matches exactly the photos I have posted of damage. As to your questions 1. Relatively timely...no major, just...

Would not make sense for mfr to make what you describe. You can find what makes sense: 1" manifolds with 3/4 branches Nevertheless, it...

Of course you can try plastic shims, but that foam tank to bowl gasket may or may not expand perfectly. proof will be in your results...

1. Only use Geberit or Toto in-wall frame set ups. You can't make what you have in-wall unless you break out the drain below floor and...